A nail pop and a water-stained ceiling can both be called “drywall repair,” but the bills for them can differ by hundreds of dollars. That is why a single number rarely answers the question. Drywall repair cost in Dallas, TX depends on how big the damage is, where it is, what caused it, and how much finishing the wall needs afterward.
This guide breaks down typical Dallas-area price ranges by repair type and size, explains how labor and materials fit in, covers ceiling and water damage costs, and shows what to ask so quotes can be compared fairly.
What Drywall Repair Typically Costs in Dallas
Estimates for the Dallas area put an average single drywall repair at roughly $470, with most projects falling between about $250 and $700. That average covers a mix of small patches and mid-sized repairs. Large, overhead, or water-related jobs sit well above it, and tiny fixes sit well below.
Two things explain most of the spread. The first is repair size, since a bigger patch means more material, more compound, and more drying and sanding time. The second is the type of damage, because a ceiling or a water-damaged section takes more work than the same area of a dry wall.
Drywall Repair Cost by Repair Type
These are general estimate ranges for the Dallas area:
| Repair type | Typical estimate range |
| Nail pops | about $15 to $65 |
| Small holes (nail, screw, anchor, small impact) | about $25 to $125 |
| Dents | about $25 to $155 |
| Larger hole patch (cut-out and new piece) | about $55 to $210 |
| Cracks | about $65 to $415 |
| Joints and seams | about $45 to $210 |
| Corner bead repair | about $55 to $165 |
| Ceiling repair | about $230 to $1,350 |
| Water-damaged drywall replaced | about $620 to $1,600 |
Note: These figures are general estimates, not confirmed prices. The final cost depends on factors such as the size and type of damage, wall or ceiling location, access, texture, finishing, and whether water damage or hidden problems are found. A written, itemized quote after measurement is the only reliable number.
Two points help read the table. First, ranges are wide on purpose, because an inch-wide crack and a crack running the length of a wall are both “cracks.” Second, these ranges cover the drywall work itself. Leak repair, drying out framing, plumbing, roofing, and mold assessment are separate costs.
Drywall Patch Cost by Size
Size is the biggest single driver of the price. Typical estimates for patching, covering materials and labor, scale roughly like this:
| Patch size | Typical estimate range |
| 1 square foot | about $55 to $80 |
| 2 square feet | about $105 to $155 |
| 4 square feet | about $210 to $310 |
| 8 square feet | about $415 to $620 |
| 10 square feet | about $520 to $775 |
| 20 square feet | about $1,040 to $1,550 |
At roughly $50 to $80 per square foot of repaired area, small patches cost little in absolute terms but can cost more per square foot than large ones, because setup, travel, and cleanup are spread over less work. Multiple small repairs in one visit often cost less per repair than the same repairs booked separately. A professional drywall repair service in Dallas measures the damaged area before pricing it, which is why a site visit gives a more reliable figure than a rough guess.
Labor Cost vs. Material Cost
Most of a drywall repair bill is labor. Materials for a typical patch, such as drywall, joint compound, tape, screws, and primer, are modest, and a sheet of standard drywall generally runs about $15 to $30. Paint adds a smaller amount on top.
Labor is where time shows up. A basic patch can take several hours across multiple visits, because compound has to dry between coats. Hourly rates in the area commonly run from about $60 for basic patching to roughly $110 for more specialized work. A flat charge for debris removal and cleanup is also common, often in the range of $150 to $250 for a job that produces real debris.
Ceiling Drywall Repair Cost
Ceiling repair cost runs higher than wall repair because overhead work is slower and harder. Lifts, scaffolding, or extra support add time, and ceilings tend to show every flaw under side light, so finishing takes more care. Typical Dallas-area estimates for a ceiling repair range from about $230 to $1,350, and overhead work often adds roughly 20 to 50 percent compared with a similar wall repair.
Ceiling problems also tend to have a cause above them. A stain or sag may come from a roof leak, a plumbing line, or air conditioning condensation, and that source has to be fixed before the drywall is repaired. Otherwise the new patch will stain again.
Water-Damaged Drywall Repair Cost
Water damage is the most variable category. Replacing saturated drywall commonly falls in the range of about $620 to $1,600, and the figure grows with the size of the affected area. Several related costs can sit outside that range:
- Finding and fixing the leak, which is billed by a plumber or roofer
- Drying out framing and insulation
- A hidden-moisture inspection, if the extent of the damage isn’t clear
- Mold assessment or remediation, if growth is present
Drywall that stayed wet for more than a day or two, or that smells musty, is worth having assessed before it is covered up, since closing a wall over damp framing can hide a problem. This guide on preventing mold growth on drywall in humid climates explains what to check before closing up a damp wall. What an insurance policy covers for sudden leaks is a question for the insurer.
Texture Matching, Priming, and Painting Costs
Finishing is where a repair either disappears or doesn’t. Texture matching commonly costs about $1 to $2 per square foot, and painting a repaired area commonly runs about $2 to $6 per square foot. A repair priced as “patching only” often leaves painting and texture to the homeowner, while a repair priced as “paint-ready” or “complete” includes them.
This is why two quotes for the same hole can differ so much. One may cover only patching and sanding, while another covers texture, priming, and paint. Comparing them fairly means knowing which steps each one includes.
What Makes One Drywall Repair Quote Higher Than Another
Several factors move the price:
- Size and number of repairs. More area and more separate spots both add time.
- Wall versus ceiling. Overhead work costs more.
- Patch versus replacement. Replacing a section takes more steps than filling a hole.
- Water damage and hidden damage. Opening a wall can reveal more than was visible.
- Texture type. Knockdown, orange peel, and other finishes differ in how hard they are to match.
- Access. Furniture, tight spaces, stairs, and tall ceilings change the setup.
- Finishing scope. Priming and paint add cost.
- Timing and demand. Busy periods, such as after storms, can affect scheduling and pricing.
Example Scenarios
These examples are illustrative and use the ranges above:
- A few nail pops and one small hole in a bedroom wall: often in the tens of dollars up to the low hundreds, depending on whether painting is included.
- A doorknob-sized hole needing a patch and paint: commonly in the low hundreds.
- A 4-square-foot repair with texture matching: commonly in the range of about $210 to $310 for the patch, plus finishing.
- A water-stained ceiling section replaced after the leak is fixed: commonly several hundred dollars to over a thousand, plus the cost of the leak repair itself.
Real jobs rarely match the examples exactly, which is why measurement matters.
How to Get an Accurate Drywall Repair Estimate
A flat price from a website can’t account for texture, access, or hidden damage. A useful estimate comes from someone looking at the damage, measuring it, and writing up what the job includes. When collecting quotes, ask:
- What exactly is being repaired, and is it a patch or a replacement?
- Does the quote include taping, texture matching, priming, and paint?
- Is cleanup and debris removal included?
- What happens if hidden damage is found once the area is opened?
- Is the water source or crack cause being addressed first?
The Complete guide to drywall repair in Dallas covers how repairs are done, which helps in judging whether a quote is realistic.
Stone Drywall Solutions serves residential and commercial projects across the Dallas-Fort Worth area.
Questions Homeowners Ask About Drywall Repair Cost
How much does it cost to patch a small hole in drywall?
Small holes commonly fall in the range of about $25 to $125 when done professionally, depending on size and finishing. Do-it-yourself patch kits cost less, but results vary.
Is it cheaper to repair or replace drywall?
Repair is usually cheaper for localized damage. Replacement costs more but is the better choice when the board is soft, swollen, or badly broken.
Why does ceiling repair cost more than wall repair?
Overhead work takes more time, more support equipment, and more finishing care, which raises the labor portion of the bill.
Does the price include painting?
Not always. Patching, texture, priming, and paint are often priced separately, so it is worth confirming what a quote covers.
Get a Written Quote for the Repair
The right number for a drywall repair comes from measuring the damage and pricing the actual work. For a Dallas home with holes, cracks, ceiling damage, or water-damaged walls, Contact Stone Drywall Solutions or call (469) 999-8302 to talk through the repair and request a written quote.
